Kenwood KSC-SW11

Durum Yeni

Kenwood KSC-SW11

compact powered subwoofer
aluminum enclosure with 8-1/4" x 5-1/8" sub
built-in amplifier: 75 watts RMS power (150 watts maximum)
wired remote for control over:volume level
variable low-pass crossover (50-125 Hz)
selectable phase control (0°, 180°)
power/ground wiring harness
preamp- (RCA) and speaker-level inputs
frequency response: 35-125 Hz
dimensions: 11"W x 2-3/4"H x 7-1/2"D

Daha Fazla Detaylar

Uyarı: Stoktaki Son Ürün!

Arkadaşına Gönder

Arkadaşına Gönder

Kenwood KSC-SW11

Kenwood KSC-SW11
compact powered subwoofer
aluminum enclosure with 8-1/4" x 5-1/8" sub
built-in amplifier: 75 watts RMS power (150 watts maximum)
wired remote for control over:volume level
variable low-pass crossover (50-125 Hz)
selectable phase control (0°, 180°)
power/ground wiring harness
preamp- (RCA) and speaker-level inputs
frequency response: 35-125 Hz
dimensions: 11"W x 2-3/4"H x 7-1/2"D

Alıcı :

Arkadaşınızın Adı ^* :

Arkadaşınızın eposta adresleri ^* :

^* Zorunlu alan

Veya İptal
Yazdır

11,367.80 TL

-5%

11,966.10 TL

Miktarı

İstek listesine ekle

Daha Fazla Bilgi

Features & specs

General
Enclosure Type	Sealed
Finish Material	Metal/Plastic
Grille	Metal
Connector Type	RCA, Molex
Bi-amp Inputs	No
Woofer Size (inches)	5x8
Woofer Material	N/A
Passive Radiator	---
Width	11"
Height	2-3/4"
Depth	7-1/2"
Parts Warranty	1 Year
Labor Warranty	1 Year
Specifications
Frequency Response	35-125
Amplifier Power (RMS)	75 watts
Maximum Wattage	150 watts
Sensitivity	110 dB
Impedance	---
Second Voice Coil Impedance	---
Crossover Point	50-125

Product Research

Features

Product Overview: The KSC-SW11 amplified subwoofer features a built-in amp (75 watts RMS, 150 watts peak) and an oval woofer (8-1/4" x 5-1/8"), housed in a rugged, compact enclosure.

Wired Remote Control: The wired remote control provides fingertip control over your low frequencies. You can adjust the volume and crossover point (50-125 Hz), plus switch the phase from 0° to 180°. The remote control can be mounted using the supplied adhesive hook and loop fastener. The sub can be used without the remote, but the volume, crossover point, and phase will all revert to the default values.

Note: There are no controls on the subwoofer.

Mounting Options: The brackets can be mounted to either the sides or the ends of the enclosure. They add approximately 1-1/8" to the width or length, and 1/8" to the height.

Signal Input: The female RCA inputs on the included harness can be used with a line level or speaker level signal. A 14' speaker-level input extension cable is also included (male stereo RCA jacks on one end and speaker wire with bullet connectors on the other).

Wiring Harness: The included wiring harness covers power, ground, remote turn-on, and signal input. The wire length varies by function: